Tung Oil by Fusion

$22.98$37.98

Tung Oil by Fusion

Tung Oil available in 2 sizes.

Clear

Description

 

This high quality Tung Oil by Fusion is excellent for a permanent  and durable finish outdoors.

Tung Oil is another natural wood finishing oil that is easy to apply, has no VOCs, protects and enhances your wood gives you a water-resistant finish and is easy to maintain.

Tung Oil is a natural wood finishing oil, excellent for interior and exterior projects. Highly resistant to water and abrasion, it is the most durable of all the natural oils. Tung Oil leaves a matte finish that does not yellow over time. The lustre (sheen) can increase with extra coats and burnishing. This finish is preferred for exterior coatings, especially when looking to protect paint finishes like Milk Paint by Fusion.

Pure Tung Oil contains no thinners or driers in it, making it food safe and eco-friendly. Polymerized Tung Oil which is more commonly found in your local hardware or woodworking shop, has thinners or driers in it. Typically these can be quite toxic. Our Tung Oil is 100% Pure Unpolymerized. We recommend you using our Odorless Solvent to cut your Tung Oil to help it penetrate bare wood more, and to dry faster if this is desired. Our Odorless Solvent is the safest on the market, It is 99.7% monomer free ( this is what causes the headaches).

Unlike a Varnish or Water-based poly coating, Tung Oil and Hemp Oil are breathable. Now, what does that mean exactly? Because these oils are from natural pressed seeds with no additives or solvents, they do not leave a plastic coating or film like conventional topcoats, like polyurethane or varnish. The oil saturates the wood, seals it from moisture from within. You will never have chipping, flaking or peeling! At least 2 coats are recommended, however the more coats, the more protection. You will want to re-coat every few years as the wood starts to look dull and dry. Re-coating is simple and easy, as you will not have to sand, or removing any peeling/flaking paint, just add oil, like a conditioner!

Tung oil can be used on all raw and properly prepped wooded surfaces, it is also a great finished to use over the top of Milk Paint as the Milk Paint is porous it absorbs into the paint binding with it to provide a water-resistant finish natural tactile finish. It is also recommended for outdoor projects as it has slightly more water resistance than Hemp Oil.

  • Floors
  • Furniture
  • Kitchen cabinets/islands
  • Doors & windows
  • Woodwork, walls & ceilings
  • Food surfaces
  • Exterior Surfaces

These oils adjust to the expansion and contraction of wood from temperature and humidity and are able to release any moisture trapped within. Typical paints and finishes that contain synthetics do not offer this flexibility, and the surface of them will break as the moisture within the wood is trying to escape. They also do not scratch like conventional plastic coatings.

  • Revive old dry looking wood
  • Water-Resistant
  • Alcohol resistant
  • Matte to a satin-matte finish
  • Ideal for food surface (without the use of odourless solvent)
  • Interior and exterior use
  • You can use Tung Oil to finish concrete, stone brick and even bamboo!

HOW TO USE IT

Clean and prep your surface

Prep is your friend! make sure your surface is clean, these natural oil finishes won’t penetrate polyurethane or varnish so you would need to remove that by sanding.

Cut the Oil with Mineral Spirits

Thinning the oil with odorless solvent helps it penetrate the surface and speeds up the dry time. Subsequent coats can be full strength but must be wiped down after 15 minutes. Always allow ample drying time (48 hours+).  Using it without the solvent the dry time is longer. If a solvent has been used cut the Tung Oil it is no longer a food-safe finish.

Applying the oil

After the surface has been prepped by removing any debris, or unwanted previous poly coating, you may proceed to apply the Tung Oil finish. Apply the Tung Oil generously with a brush or cloth. Let the wood soak in the Tung Oil for approximately 5-10 minutes. Remove the excess Tung Oil within 10 minutes of application, if you leave the Tung Oil on for too long and it dries it may go sticky and tacky, you don’t want the Tung Oil to start drying on the surface you want all the excess removed.

Fusion Tung Oil does not contain added solvents, it is more pure and high quality. More info Fusion Mineral Paint.

250ml and 500mL

Additional information

Weight 1 lbs
Dimensions 12 × 12 × 12 in
size

250mL, 500mL

You may also like…